Assessment Validation: A Beginner's Guide to Validating Assessments

Assessment Validation: A Beginner's Guide to Validating Assessments

Blog Article

Upon receiving registration, RTOs must manage various responsibilities like annual declarations, AVETMISS reporting, and marketing compliance, with validation being a notably arduous task.

Although we have published several articles on validation, let’s revisit the term. ASQA describes validation as a quality review of the assessment process.

Validation involves verifying which areas of an RTO's assessment process are correct and highlighting where improvements are needed. Understanding its key components makes the task less intimidating.

As per Clause 1.8 of the SRTOs 2015, RTOs are required to ensure that their assessment systems, including RPL, meet training package requirements and are conducted following the Principles of Assessment and Rules of Evidence.

The standards necessitate conducting two types of validation.

The first type of assessment validation checks that your RTO's assessment aligns with the training package requirements in your scope.

The next type of validation confirms assessments are carried out following the principles of assessment and rules of evidence.

This means we validate assessments both before and after they are conducted. This article will cover the first type—assessment tool validation.

What are the Two Types of Assessment Validation?

What Does Assessment Validation Mean?

As mentioned earlier and in our earlier blog entries, validation is divided into two parts: (1) assessment tool validation and (2) post-assessment validation.

Pre-assessment validation, or assessment tool validation, is concerned with the first part of the clause, which ensures all unit requirements are met and that workbooks are fully compliant.

On the implementation side, post-assessment validation ensures Registered Training Organisations conduct assessments according to the Principles of Assessment and Rules of Evidence.

Our focus in this article will be on assessment tool validation.

How to Conduct Assessment Tool Validation

Having discussed the two types of validation, let’s delve into assessment tool validation.

When Assessment Tool Validation Should Be Done

Assessment tool validation aims to verify that all elements, performance criteria, and performance and knowledge evidence are covered by your assessment tools.

Therefore, any time you obtain new learning resources, assessment tool validation should be completed before students use them.

You don't have to wait until your next 5-year validation schedule. Validate new resources right away to ensure they’re appropriate for student use.

Nevertheless, this isn't the only reason to perform this type of validation. Conduct assessment tool validation also when you:

- resources are updated by you
- your scope includes new training products
- you review your course against training product updates
- you identify your learning resources as a risk during your risk assessment

ASQA's risk-based regulation approach requires RTOs to conduct regular risk assessments. Therefore, complaints from students about learning resources are a perfect time for assessment tool validation.

Training Products to Validate

It's crucial to remember this validation ensures compliance of all learning resources before they are used. All RTOs should validate resources for each unit.

What You Need for Assessment Tool Validation

Teaching Materials

For validation of your assessment tools, you will require the full set of your learning resources:

Mapping tool – this should be the first document to examine. It shows which assessment items correspond to unit requirements, facilitating quicker validation.

Learner/student workbook – assess its appropriateness as an assessment tool. Confirm clear instructions and adequate answer fields. This is a common problem.

Assessor guide/marking guide – verify that instructions for assessors are comprehensive and clear benchmarks for each assessment item are included. Clear benchmarks are key to reliable assessment outcomes.

Other related resources – may consist of checklists, registers, and templates created separately from the workbook and marking guide. Validate them to ensure they are appropriate for the assessment task and address unit requirements.

Validation Panel

Clause 1.11 defines the requirements for validation panel members, stating validation can involve one or more individuals. RTOs usually require all trainers and assessors to be present, sometimes including industry experts.

Your validation panel must, as a group, possess:

Vocational competencies and current industry skills that relate to the unit being validated

Current knowledge and skills related to vocational teaching and learning

Any one of the following training and assessment qualifications:

TAE40116 Certificate IV in Training and Assessment or its replacement

Validation form/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Using a validation tool helps in both the validation process and documentation. It facilitates seeing how each assessment item matches each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Simultaneously, it can serve as proof that you have validated your resources before they are used by students.

While ASQA does not have a recommended or required template for assessment tool validation, many templates are available online. These tools generally require validators to review the tools as a whole to see if they meet the principles of assessment.

Assessment Principles Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

Though these templates simplify validation, they can lead to judgment errors due to limited space for comments on each assessment item.

It is highly advisable to use a more detailed template for evaluating each unit requirement and its corresponding assessment items. Below is an example:

Element Performance Criteria Assessment Directions Standards Assessment Instrument Rectification Recommendations
What do you Need to Check?
What Should Be Checked?

As noted in our blog post Common Problems In Assessment Tools, your assessment tools must ensure trainers follow assessment principles and evidence rules.

Key Principles of Assessment
Fairness – Are equal opportunities and access ensured in the assessment process?

Flexibility – Are multiple options available in the assessment to demonstrate competence based on different needs and preferences?

Validity – Does the assessment test what it is meant to test? Is it a valid tool for assessing the required skill or knowledge?

Reliability – Will the assessment yield the same results every time, no matter who conducts the training? Will different assessors make the same decision on skill competence?

Rules of Evidence

Validity – Does the evidence demonstrate that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is there sufficient evidence to ensure the learner has the required skills and knowledge?

Authenticity – Does the assessment tool verify that the work is the candidate’s own?

Currency – Do the assessment tools align with current units of competency and up-to-date industry practices?

Although these are often addressed in VET professional development and nationally recognised training, numerous tools fail to meet these requirements.

To prevent using learning resources that overlook some unit requirements, make sure to follow these guidelines:

Follow Through with Actions

Observe the verbs in the unit requirements and ensure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:

Perform each of the following activities at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication according to service and regulatory requirements:

nappy changing

bottle preparation, feeding infants from bottles, and cleaning equipment

solid food prep and feeding babies

respond to infant signs and cues appropriately

prepare babies for sleep and settle them

monitor and encourage physical exploration and gross motor skills suitable for the age

Having students describe the nappy-changing process for babies under 12 months old doesn’t directly meet the unit requirement. Unless the unit requirement is meant to assess underpinning knowledge (i.e., knowledge evidence), students should be performing the tasks.

Notice the Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students check here complete the tasks listed twice on just 1 baby won’t cut it.
Notice the numbers. In the CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby doesn’t suffice.

Entire or Not Competent

Observe the lists. As illustrated above, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Can You Clarify Further?

Each assessment item must have clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Therefore, it’s crucial that your instructions do not confuse students or assessors. For instance:
What kind of information can be included in a work package?
What kinds of information can be included in a work package?

Possible answers include:

Necessary resources

Pertinent costs

Length of activities

Assigned roles and responsibilities

When an assessment item requires multiple answers, indicate the number of answers needed from a student. This way, your assessment is reliable, and the evidence collected is valid.

This also applies to assessment items with double-barrelled questions or those that ask for multiple answers at once. These can confuse students and assessors, as shown in the sample question below:

Identify a hazard and/or environmental concern in the work area and select the most effective hazard control hierarchy.

Answers may include, but are not necessarily limited to:

Weather conditions – work area isolation, engineering controls, PPE

Work area and ground conditions – elimination, isolating, engineering controls

People – isolation, engineering, administration

Structural hazards – substitution, isolating, engineering controls

Chemical hazards – isolating, use of engineering controls, administrative controls

Equipment or machinery – isolation, engineering, administration

Steering clear of double-barrelled questions makes it easier for students to answer and for assessors to accurately judge student competence.

Considering these requirements, you might wonder, “Don’t learning resource developers offer audit guarantees?” However, with these guarantees, you must wait for an audit before they help rectify noncompliance. This affects your compliance history, so it's better to take a safe and compliant approach.